Oil Pump: Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

1.

Position the oil pump and install the bolts.
- Tighten in the sequence shown below to 10 Nm (89 lb-in).

Fig 1: Oil Pump Bolts Tightening Sequence

Courtesy of FORD MOTOR CO.

2.

Install the oil pump screen and pickup tube. For additional information, refer to Engine Lubrication Components - Exploded View and Oil Pump Screen and Pickup Tube .

3.

Install the timing drive components. For additional information, refer to Timing Drive Components .