LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 317 (Rear Drive Axle/Differential) >> In-Vehicle Repair >> Stub Shaft Pilot Bearing And Seal >> Removal

Stub Shaft Pilot Bearing And Seal: Removal

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the halfshaft assembly. for additional information, refer to rear drive halfshafts .
  2. To remove the seal only, use the special tool to remove the stub shaft seal.
    Fig 1: Identifying Special Tool (307-309,100-D01)
    G04617595Courtesy of FORD MOTOR CO.
  3. To remove the bearing and seal, use the special tools to remove the stub shaft pilot bearing and seal.
    Fig 2: Identifying Special Tool (308-125, 100-D01)
    G04617596Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals