Rear Brake Pads: Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Make sure to correctly locate the retraction clip.

Fig 1: Installing Brake Pads And Retraction Clips

Courtesy of FORD MOTOR CO.

Install the brake pads and retraction clips.
Position the brake caliper and install the 2 brake caliper bolts.
- For F-250, F-350 single rear wheel caliper, tighten to 35 Nm (26 lb-ft).
- For F-350 dual rear wheel caliper, tighten to 76 Nm (56 lb-ft).
- For F-450, F-550 dual rear wheel caliper, tighten to 62 Nm (46 lb-ft).
  
  Fig 2: Positioning Brake Caliper And Installing 2 Brake Caliper Bolts
  Courtesy of FORD MOTOR CO.