LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Warning System) >> Diagnosis And Testing >> Warning Devices >> Principles of Operation >> Safety Belt Minder

Safety Belt Minder

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

The safety belt minder is configurable. To configure using a diagnostic tool, refer to MODULE CONFIGURATION . To configure without using a diagnostic tool, refer to SAFETY BELT MINDER DEACTIVATING/ACTIVATING .

The safety belt minder feature supplements the current safety belt warning function. The safety belt minder is enabled after the current safety belt warning is complete. The safety belt minder reminds the driver that the driver or passenger safety belt is unbuckled by intermittently sounding a chime and illuminating the safety belt warning lamp in the instrument cluster once the vehicle speed exceeds 5 km/h (3 mph). While activated, the safety belt minder alternates the chime and indicator from on for 6 seconds to off for 30 seconds.

NOTE: The safety belt minder is disabled for 1 ignition switch ON cycle if the safety belt is buckled then unbuckled during that specific cycle.