LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Vehicle Dynamic Suspension) >> Diagnosis And Testing >> Vehicle Dynamic Suspension >> Pinpoint Tests >> Pinpoint Test B: Unable To Enter Self-Test >> Pinpoint Test B: Unable To Enter Self-Test

Pinpoint Test B: Unable To Enter Self-Test

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. B1 CHECK THE COMMUNICATIONS TO THE AIR SUSPENSION MODULE 
    • Key in ON position.
    • Turn the air suspension switch ON.
    • Check the communication to the air suspension module.
    • Does the scan tool communicate with the air suspension control module? 

    Yes  : INSTALL a new air suspension module. REFER to AIR SUSPENSION MODULE . CLEAR the DTC(s). REPEAT the self-test.

    No  : GO to PINPOINT TEST A .

scientia non olet · About LEMON Manuals