DTC P0A50: Generator Position Sensor Circuit OVERSPEED
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0A50 - GENERATOR POSITION SENSOR CIRCUIT OVERSPEED
| Description: | Indicates the transaxle generator exceeded its calibrated maximum RPM limit. | ||
| Possible Causes: |
|
||
| Diagnostic Aids : | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | - | GO to Pinpoint Test TO . |