DTC P0613: Transaxle Control Module (TCM) System Fault

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

P0613 - TRANSAXLE CONTROL MODULE (TCM) SYSTEM FAULT

Description:

This DTC indicates a transaxle control module (TCM) internal malfunction.

Possible Causes:

TCM processor error.
TCM A/D converter malfunction.
TCM EEPROM malfunction.
Damaged TCM.

Diagnostic Aids:

Clear the transaxle control module (TCM) continuous DTCs. Repeat the self-test. If DTC P0613 is present again, install a new transaxle. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION - ELECTRONICALLY CONTROLLED CONTINUOUSLY VARIABLE TRANSMISSION (ECVT) .

Application

Key On Engine Off

Key On Engine Running

Continuous Memory

All

See ⁽¹⁾

See ⁽²⁾

⁽¹⁾	Install a new transaxle. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION - ELECTRONICALLY CONTROLLED CONTINUOUSLY VARIABLE TRANSMISSION (ECVT) .

⁽²⁾	Clear the transaxle control module (TCM) continuous DTCs. Repeat the self-test. If DTC P0613 is present again, install a new transaxle. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION - ELECTRONICALLY CONTROLLED CONTINUOUSLY VARIABLE TRANSMISSION (ECVT) .