LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Engine Controls - Pinpoint Tests - 6.0L (99P F450/550) Diesel) >> Pinpoint Test D: Crankshaft Position (CKP) Sensor >> Introduction >> Fuel Quantity Control/Torque Limiting

Fuel Quantity Control/Torque Limiting

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Engine torque and fuel are controlled and are dependent on engine speed. Fuel quantity is determined by engine speed.

This pinpoint test is intended to diagnose the following:

Fig 1: Crankshaft Position (CKP) Sensor Connector
G04586967
Fig 2: Fuel Injector Control Module-C (FICM-C) Connector
G04586968
Fig 3: Powertrain Control Module (PCM) Connectors
G04586969
scientia non olet · About LEMON Manuals