LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 203 (Warning System) >> General Procedures >> Safety Belt Minder Deactivating/Activating >> Preparation

Safety Belt Minder Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The driver and front passenger belt minder are deactivated/activated independently. When deactivating/activating one seating position, do not buckle the other position as this terminates the process.
  1. Before deactivating/activating the belt minder, set the parking brake.
  2. Place the transmission selector lever in PARK.
  3. Place the ignition switch in the OFF position.
  4. Unbuckle the driver and front passenger safety belts.
scientia non olet · About LEMON Manuals