LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Anti-Theft System -- Pats) >> Diagnosis And Testing >> Passive Anti-Theft System (PATS) - Pinpoint Tests >> Pinpoint Tests >> Pinpoint Test F: Anti-Theft Number Of Programmed Keys Is Below Minimum >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

The transceiver module communicates with the passive anti-theft system (PATS) key. During each vehicle start sequence, the transceiver module reads the PATS key identification code and circuit 1216 (GY/OG) sends the data to the powertrain control module (PCM). The control functions are contained in the PCM. This module carries out all of the PATS functions, such as receiving the identification code from the PATS key and controlling engine enable. The PCM initiates the key interrogation sequence when the key is turned to ON or START.