LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1642 (Engine Controls - Pinpoint Test JB: Secondary Ignition (Cop) Through Pinpoint Test KF: Fan Control (FC) Relays - (Except Diesel & Hybrid)) >> PINPOINT TEST JB: Secondary Ignition (COP) >> Introduction

PINPOINT TEST JB: Secondary Ignition (COP): Introduction

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: A damaged ignition system may cause high catalyst temperatures. Check the components next to the catalyst and muffler for heat damage.
NOTE: There is additional information available on this procedure. Please copy and paste the following URL into your Internet browser: mms://multimedia.ford.com/seopts/Service_Tips/ignition3.wmv.

This pinpoint test is intended to diagnose the following:

FIRING ORDER FOR COIL ON PLUG APPLICATIONS

Vehicle Firing Order for Coil On Plug Applications
BASE, 4-cylinder applications 1 3 4 2
BASE, 6-cylinder applications 1 4 2 5 3 6
BASE, 8-cylinder applications 1 3 7 2 6 5 4 8
5.0L Mustang, 6.2L F-150, F-250 - F-550 1 5 4 8 6 3 7 2
BASE, 10-cylinder applications 1 6 5 10 2 7 3 8 4 9