LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1635 (Engine Controls - Powertrain DTC Charts & Descriptions - DTC P0600 Through DTC P164A - (Except Diesel & Hybrid)) >> DTC P144C: Evaporative Emission System Purge Check Valve Performance

DTC P144C: Evaporative Emission System Purge Check Valve Performance

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
P144C - EVAPORATIVE EMISSION SYSTEM PURGE CHECK VALVE PERFORMANCE

Description:  The powertrain control module (PCM) tests the EVAP canister purge check valve for a stuck open condition. The EVAP canister purge check valve test is performed during minimal boost conditions, once per drive cycle, when entry conditions are met. This DTC sets if the fuel tank pressure exceeds a calibrated amount within a specified amount of time during the test.
Possible Causes: 
  • Stuck open EVAP canister purge check valve
  • Stuck closed EVAP canister purge check valve
  • Damaged EVAP ejector venturi
  • Damaged EVAP canister purge check valve
Diagnostic Aids: 
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST HX .