LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1633 (Engine Controls - Powertrain DTC Charts & Descriptions - DTC P0001 Through DTC P0217 - (Except Diesel & Hybrid)) >> DTC P0113: Intake Air Temperature (IAT) Sensor 1 Circuit High

DTC P0113: Intake Air Temperature (IAT) Sensor 1 Circuit High

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
P0113 - INTAKE AIR TEMPERATURE (IAT) SENSOR 1 CIRCUIT HIGH

Description:  The DTC indicates the sensor signal is greater than the self-test maximum.
Possible Causes: 
  • Open circuit in the harness
  • IAT signal circuit short to voltage
  • Damaged IAT sensor
  • Incorrect harness connection
Diagnostic Aids:  An IAT PID reading greater than self-test maximum with the ignition ON engine OFF or during any engine operating mode indicates a concern is present.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST DA .