LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1633 (Engine Controls - Powertrain DTC Charts & Descriptions - DTC P0001 Through DTC P0217 - (Except Diesel & Hybrid)) >> DTC P0010: Intake Camshaft Position Actuator Circuit/Open (Bank 1)

DTC P0010: Intake Camshaft Position Actuator Circuit/Open (Bank 1)

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
P0010 - INTAKE CAMSHAFT POSITION ACTUATOR CIRCUIT/OPEN (BANK 1)

Description:  The powertrain control module (PCM) monitors the variable camshaft timing (VCT) circuit for high and low voltage. The test fails if the voltage exceeds a calibrated limit for a calibrated amount of time.
Possible Causes: 
  • Open or short in the VCT circuit
  • Open VPWR circuit
  • Open or short in the VCT solenoid valve
Diagnostic Aids: 
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST HK .