PINPOINT TEST TA: Clutch Pedal Position (CPP) Switch: Introduction

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2008 Mercury Sable, 2008 Mercury Mountaineer, 2008 Mercury Milan, 2008 Mercury Mariner, and 2008 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.

This pinpoint test is intended to diagnose the following:

CPP (11A152/7C534)
harness circuits: CPP / CPP BT and SIGRTN / GND
powertrain control module (PCM) (12A650)

Fig 1: Clutch Pedal Position (CPP) Switch Connector - A

Courtesy of FORD MOTOR CO.

Fig 2: Clutch Pedal Position (CPP) Switch Connector - B

Courtesy of FORD MOTOR CO.

Fig 3: Clutch Pedal Position (CPP) Switch Connector - C

Courtesy of FORD MOTOR CO.

Fig 4: Clutch Pedal Position (CPP) Switch Connector - D

Courtesy of FORD MOTOR CO.

Vehicle	Connector	Pin	Circuit
Escape/Mariner	A	2 4	SIGRTN CPP
F-150	B	2 1	GND CPP
Mustang	C	2 1	GND CPP
Ranger	B	5 6	GND CPP
All other vehicles	D	2 1	GND CPP

For PCM connector views or reference values, refer to the REFERENCE VALUES article.

Vehicle	Connector	Pin	Circuit
Escape/Mariner	150 (50-50-50) Pin	B41, E41, T41 T27	SIGRTN CPP
F-150	190 Pin	B39 B58, E58, T43	CPP-BT SIGRTN
F-Super Duty	170 Pin	B34 B41, E58, T41	CPP-BT SIGRTN
Focus	190 Pin	T26 B58, E64, T40	CPP-BT SIGRTN
Fusion, Milan	140 Pin	B18 B58, E58	CPP-BT SIGRTN
All other vehicles	170 Pin	B41, E58, T41 B33	SIGRTN CPP