LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1599 (Exterior Trim & Ornamentation) >> Removal And Installation >> Rocker Panel Moulding >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rocker panel pin-type retainer.
  2. Pull downward on the rocker panel lower clip flanges to release them from the body.
  3. Pull outward on the rocker panel moulding to release the rocker panel upper clips from the body.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals