LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1554 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Keyless Entry Keypad >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the grommet.
  2. Using a suitable tool, release the rear keyless entry keypad retaining clip and position the keyless entry keypad aside.
  3. Remove the keyless entry keypad.
    • Disconnect the electrical connector.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals