Keyless Entry Keypad

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The keyless entry keypad carries out the following functions:

Unlocks the driver door
Unlocks all the doors
Locks all doors
Enables/disables auto-unlocking
Enables/disables autolocking
Arms/disarms the perimeter alarm
Recalls the memory seat position associated with a particular customer key code (when enabled)
Releases the luggage compartment lid latch
Programs/erases the customer key code(s)
Illuminates the keyless entry keypad lamp and issues illuminated entry on/off requests

The keypad feature operates independently of key position status, vehicle speed, or transmission position. When a keypad button is pressed, the keypad buttons illuminate to provide better visibility. If the lock all doors command is entered or 5 seconds have elapsed since the last button press, the illumination is turned off.

Each vehicle equipped with a keypad is programmed with a 5-digit factory set entry code. This code is provided to the customer through a wallet card in the Owner's Literature. In addition, this code is available through a scan tool and is also printed on the SJB label. When entering codes each digit must be entered within 5 seconds of the previous button press. In addition to the factory set code, 3 personal codes can also be programmed. For additional information on programming the personal keypad codes, refer to KEYLESS ENTRY KEYPAD CODE PROGRAMMING in this service information.