LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1552 (Seat System - Seats) >> Removal And Installation >> Seat Cushion Cover - Front >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat backrest. For additional information, refer to SEAT BACKREST - FRONT  in this service information.
    2. NOTE: Trim cover J-clip configurations vary with seat option.
  2. Release all the remaining J-clips attaching the trim cover to the cushion frame.
    3. NOTE: Use care when separating the seat cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the cushion foam pad.
  3. Release the hook-and-loop strips, remove the hog rings (if equipped), separate the cushion trim cover from the cushion foam pad and remove.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals