Removal and Installation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This procedure applies to the MKZ with Premium Sound only. For all other amplifiers, refer to the
appropriate procedure in this service information.
- Remove the 4 pushpins and the RH luggage compartment trim panel.
- Disconnect the audio amplifier electrical connectors.
- Remove the 3 bolts and the audio amplifier.
- To install, tighten to 9 Nm (80 lb-in).
- To install, reverse the removal procedure.