Power Point: Removal

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Power point cover may differ depending on location.

Open the power point cover.
Install the Power Point Socket Remover in one of the power point socket slots.

Fig 1: Installing Power Point Socket Remover In Power Point Socket Slots
Courtesy of FORD MOTOR CO.
Position the Power Point Socket Remover so that it engages in the adjacent slot.

Fig 2: Positioning Power Point Socket Remover So That It Engages In Adjacent Slot
Courtesy of FORD MOTOR CO.
Using the Power Point Socket Remover, pull the power point socket out of the retainer.

Fig 3: Pulling Power Point Socket Out Of Retainer
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector.