LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1541 (Instrument Panel & Console) >> Removal And Installation >> Instrument Cluster Finish Panel - Fusion, Milan >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 instrument cluster finish panel screws.
  2. Remove the instrument cluster finish panel.
    • Pull the instrument cluster finish panel toward the rear of the vehicle to release the retaining clips.
    • Detach the in-vehicle temperature sensor, if equipped.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals