Material Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS TABLE
| Item | Specification |
|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) |
WSS-M6C62-A or WSS-M6C65-A1 |
ITEM DESCRIPTION
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Master cylinder primary brake tube fitting (part of 2C360) |
| 2 | - | RH front brake tube fitting (part of 2263) |
| 3 | - | LH front brake tube fitting (part of 2C360) |
| 4 | - | Master cylinder secondary brake tube fitting (part of 2C360) |
| 5 | - | RH rear brake tube fitting (part of 9J279) |
| 6 | - | LH rear brake tube fitting (part of 9J279) |
| 7 | - | ABS module electrical connector (part of 14290) |
| 8 | W505433 | Hydraulic Control Unit (HCU) bracket-to-frame bolts |
| 9 | 2C065 | HCU |