Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The engine appearance cover can be removed for additional clearance.

Remove the bolt and the position aside the windshield washer reservoir filler tube.

Fig 1: Locating Bolt And Windshield Washer Reservoir Filler Tube
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector and remove the front parking lamp socket from the headlamp assembly.
- Remove the front parking lamp bulb.
To install, reverse the removal procedure.