Removal and Installation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- For Hybrid vehicles, remove the headlamp assembly. For additional information, refer to HEADLAMP ASSEMBLY in this service information.
- For non-Hybrid vehicles, remove the air cleaner. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING - 2.5L -- FUSION & MILAN (EXCEPT HYBRID) article or INTAKE AIR DISTRIBUTION & FILTERING - 3.0L (4V) -- FUSION & MILAN article.
- For non-Hybrid vehicles, disconnect the parking/turn lamp electrical connector.
- Remove the front parking lamp socket from the headlamp assembly.
- Remove the front parking lamp bulb.
- To install, reverse the removal procedure.