General Specifications

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

GENERAL SPECIFICATIONS

Item

Specification

A/C Compressor Oil

NOTE: Use of any Air Conditioning (A/C) compressor oil other than what is specified for the specific vehicle configuration will damage the A/C compressor and contaminate the refrigerant system. For non-hybrid vehicles with a pulley driven (conventional) A/C compressor, PAG Refrigerant Compressor Oil only must be used. For hybrid vehicles with an electric A/C compressor, Motorcraft® Electric A/C Compressor Oil must be used.

A/C Pressure Relief Valve ⁽¹⁾

Close pressure

3,103 kPa (450 psi)

Open pressure

3,792-4,137 kPa (550-600 psi)

⁽¹⁾	Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve, the A/C cycling switch or the pressure cutoff switch location.

NOTE: The specifications apply to hybrid vehicles only. For non-hybrid specifications, refer to CLIMATE CONTROL SYSTEM - GENERAL INFORMATION & DIAGNOSTICS -- FUSION, MILAN & MKZ (EXCEPT HYBRID) article.

MATERIAL SPECIFICATIONS

Item	Specification	Fill Capacity
Motorcraft® Electric A/C Compressor Oil YN-32	-	Hybrid vehicles only 130 ml (4.4 fl oz)
Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada)	WSH-M17B19-A	0.62 kg (22 oz) (1.38 lb)