DTC U2101: Control Module Configuration Incompatible: Action
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Action
Check for a recently installed PCM and verify that the PCM has been configured with the correct vehicle information. If the PCM is okay, ATTEMPT to CONFIGURE the PSCM using PMI refer to MODULE CONFIGURATION . Otherwise, CONFIGURE the PSCM using vehicle as-built data. Clear the DTC and repeat the self-test. If the DTC returns, install a new EPAS gear referring to POWER STEERING SYSTEM , Removal and Installation .