LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1511 (Steering System - Hydraulic Power Assist Steering (HPAS)) >> Specifications >> General Specifications

General Specifications

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS TABLE

Item Specification
Power Steering Gear 
Turning effort 35 N (7.86 lb)
Power Steering Pump 
Flow 9.08L/min (2.40 gpm) (without turning steering wheel) Fluid @ 74°-80°C (165°-175°F) Engine @ 1,250 rpm
Minimum capacity 5.3L/min (1.4 gpm) (while turning steering wheel) Fluid @ 74°-80°C (165°-175°F) Pressure 5,171 kPa (750 psi) Engine @ 675 rpm
Pressure 689 kPa (50 psi) Fluid @ 74°-80°C (165°-175°F) Engine @ 2,000 rpm
Relief pressure 9,720-10,170 kPa (1,409-1,475 psi)
Power Steering Purge Vacuum 
Air purge vacuum 68-85 kPa (20-25 in-Hg)