DTC P0183: Fuel Temperature Sensor A Circuit High Input
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0183 - FUEL TEMPERATURE SENSOR A CIRCUIT HIGH INPUT
| Description: | The comprehensive component monitor (CCM) monitors the fuel temperature sensor circuit to the powertrain control module (PCM) for high voltage. If voltage exceeds a calibrated limit for a calibrated amount of time during testing, the test fails. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Verify the FRT PID value to determine an open or short. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Fuel rail pressure temperature (FRPT) sensor | GO to DD: Fuel Rail Pressure (FRP), Fuel Rail Temperature (FRT) and Fuel Rail Pressure Temperature (FRPT) Sensors STEP DD40. | GO to DD: Fuel Rail Pressure (FRP), Fuel Rail Temperature (FRT) and Fuel Rail Pressure Temperature (FRPT) Sensors STEP DD40. | GO to DD: Fuel Rail Pressure (FRP), Fuel Rail Temperature (FRT) and Fuel Rail Pressure Temperature (FRPT) Sensors STEP DD51. |
| Fuel rail pressure (FRP) and fuel rail temperature (FRT) sensors | GO to DD: Fuel Rail Pressure (FRP), Fuel Rail Temperature (FRT) and Fuel Rail Pressure Temperature (FRPT) Sensors STEP DD15. | GO to DD: Fuel Rail Pressure (FRP), Fuel Rail Temperature (FRT) and Fuel Rail Pressure Temperature (FRPT) Sensors STEP DD15. | GO to DD: Fuel Rail Pressure (FRP), Fuel Rail Temperature (FRT) and Fuel Rail Pressure Temperature (FRPT) Sensors STEP DD51. |