LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1497 (Automatic Transaxle - AISIN Aw21) >> In-Vehicle Repair >> Turbine Shaft Speed (TSS) Sensor >> Installation

Turbine Shaft Speed (TSS) Sensor: Installation

WARNING: This page is about a different car, the 2011 Lincoln MKZ and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the O-ring with clean automatic transmission fluid and install the TSS sensor.
    • Tighten to 12 Nm (106 lb-in).
    Fig 1: Locating Turbine Shaft Speed Sensor Bolt
    G07785952Courtesy of FORD MOTOR CO.
  2. Install the main control valve body. For additional information, refer to MAIN CONTROL VALVE BODY  in this service information.
scientia non olet · About LEMON Manuals