LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1490 (Engine Controls - Description And Operation (Except Diesel & Hybrid)) >> Powertrain Control Software >> Engine RPM Limiter

Engine RPM Limiter

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.

The PCM disables some or all of the fuel injectors whenever an engine RPM over speed condition is detected. The purpose of the engine RPM limiter is to prevent damage to the powertrain. Once the driver reduces the excessive engine speed, the engine returns to the normal operating mode. No repair is required. However, the technician should clear the diagnostic trouble codes (DTCs) and inform the customer of the reason for the DTC.

Excessive wheel slippage may be caused by sand, gravel, rain, mud, snow, ice, or excessive and sudden increase in RPM while in NEUTRAL or while driving.