Base Engine Calibration Information: Notes
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Base engine calibration information, also referred to as the powertrain calibration, is located in the lower right corner of the VC label. Engine calibration information is limited to a maximum of five characters per line (two lines maximum). Calibration information more than five characters long wraps to the second line of this field. Only the base calibration appears on this label. The revision level is no longer printed on the label; however, it can be found in On-line Automotive Service Information System (OASIS). For more information on VC label or engine calibration, refer to the VIN - IDENTIFICATION CODES -- FUSION, MILAN & MKZ
Engine Calibration Location