Clear The Continuous Diagnostic Trouble Codes (DTCs) In The Transaxle Control Module (TCM): Description
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Clearing the continuous DTCs in the TCM can be carried out with the ignition in the ON position. It can also be carried out once the ignition is cycled to the START position, as long as the vehicle is in PARK.
Clearing the continuous DTCs in the TCM allows the scan tool to command the TCM to clear all DTCs along with freeze frame information.
The following events occur when the continuous DTCs are cleared in the TCM:
- the number of DTCs are cleared
- the DTCs are cleared
- the freeze frame data is cleared