TM5 Check The MCLTEMP While Recreating The Symptom

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The vehicle may need to be driven in order to recreate the original conditions that set the DTC or caused the symptom.

Access the freeze frame data (if available) and record the DTC conditions.
Clear the TCM DTCs.
Obtain information from the customer information worksheet or any other available data from the customer.
Recreate the symptom using freeze frame and customer information.
Access the TCM and monitor the MCLTEMP (TEMP) PID.

Is the temperature less than 220°C (428°F) when the symptom occurs?

Yes	No
Unable to duplicate or identify the concern at this time. RETURN to SYMPTOM CHARTS for further direction.	INSTALL a new transaxle assembly. Refer to the ELECTRONICALLY CONTROLLED CONTINUOUSLY VARIABLE TRANSMISSION (ECVT)