LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1464 (Bumper System) >> Removal And Installation >> Bumper Bracket - Rear >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear bumper. For additional information, refer to Bumper - Rear .
  2. Remove the rear bumper bracket bolt, nut and the rear bumper bracket assembly.
    • To install, tighten to 90 Nm (66 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals