Air Tube Repair

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Cut the tube at the damaged area.
Trim the sleeve material from both ends of the damaged tube.

Fig 1: Trimming Sleeve Material (With Specifications)

Courtesy of FORD MOTOR CO.

Taper both ends of the tube by shaving or sanding it 3 mm (0.11 in) from the tips.

Fig 2: Tapering Both Ends Of Tube

Courtesy of FORD MOTOR CO.

Install the repair filling.

Fig 3: Repairing Tube (With Specifications)

Courtesy of FORD MOTOR CO.

NOTE: Check system for leaks.

Inflate the air suspension system. For additional information, refer to Ride Height Adjustments .