LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1434 (Engine Mechanical - 4.6L (2V)) >> In-Vehicle Servicing >> Hydraulic Lash Adjuster >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the camshaft roller followers. For additional information, refer to Camshaft Roller Follower .
  3. Remove the hydraulic lash adjusters.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals