LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1434 (Engine Mechanical - 4.6L (2V)) >> In-Vehicle Servicing >> Camshaft Roller Follower >> Installation

Camshaft Roller Follower: Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the Valve Spring Compressor to compress the valve spring and install the camshaft roller followers.
    2. Fig 1: Camshaft Roller Followers
    GF0013583Courtesy of FORD MOTOR CO.
  2. Remove the Valve Spring Compressor Spacer from between the valve spring.
    3. Fig 2: Installing Special Tool Between Valve Spring Coils
    G03962476Courtesy of FORD MOTOR CO.
  3. Install the valve covers. For additional information, refer to Valve Cover - RH  or Valve Cover - LH .
scientia non olet · About LEMON Manuals