Upper Arm: Installation
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
- Position the upper arm and loosely install the 2 bolts and nuts.
- Attach the wheel speed sensor retainers to the upper arm.
- Install the shock absorber and spring assembly. For additional information, refer to Shock Absorber and Spring Assembly .
- Install the wheel and tire. For additional information, refer to REMOVAL & INSTALLATION article.
- With the weight of the vehicle on the wheel and tire assemblies, tighten the 2 upper arm nuts to 150 Nm (111 lb-ft).
- Check and, if necessary, align the front end. For additional information, refer to GENERAL PROCEDURES article.