LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1426 (Seat System - Seats) >> Removal And Installation >> Seat Control Switch - Redundant Front Passenger Fore/Aft, Signature L and Executive L >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the armrest, remove the 4 screws and armrest tray door assembly.
  2. Remove the 2 rubber bumpers and remove the 2 screws.
  3. Disengage the retaining clips, position aside the armrest tray and access the redundant seat control switch.
  4. Disconnect the redundant seat control switch electrical connector.
  5. Release and remove the redundant seat control switch.
  6. To install, reverse the removal procedure.