Pinpoint Tests: Notes

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Most faults are due to connector and/or wiring concerns. Carry out a thorough Inspection and Verification before proceeding with the pinpoint test.

NOTE: Use the correct probe adapter(s) when taking measurements. Failure to use the correct probe adapter(s) may damage the connector.

Refer to Inspection and Verification , the DRIVER DOOR MODULE (DDM) DTC CHART , DRIVER SEAT MODULE (DSM) DTC CHART and the Symptom Chart for direction to the appropriate pinpoint test.