Front Seats: Notes

The front seats are available in 3 styles:

• Executive series (power lumbar)
• Signature series (trim cover like Executive series with memory, power lumbar and heat standard)
• Signature L series (unique trim style with memory, power lumbar and heat standard)

The power seats have the following serviceable items:

• Head restraint attached to the seat backrest
• Head restraint guides attached to the seat backrest frame
• Power recliner attached to the seat backrest and seat track
• Power lumbar assembly attached to the seat backrest frame (if equipped)
• Seat backrest foam pad attached to the backrest frame (includes heater mat, if equipped)
• Side air bag module attached to the seat backrest frame
• Seat backrest frame attached to the seat track
• Seat backrest cover attached to the backrest foam pad
• Seat cushion cover attached to the cushion foam pad
• Seat track
• Front seat track motor and transmission assembly attached to the seat track
• Seat cushion frame attached to the seat track
• Driver seat cushion foam pad attached to the cushion frame (includes heater mat, if equipped)
• Passenger seat Occupant Classification Sensor (OCS) system attached to the seat cushion frame (includes cushion foam pad)
• Passenger seat cushion heater mat (if equipped) (only to be attached to a new OCS system foam pad)
• Power lumbar switch attached to the seat cushion frame (if equipped)
• Driver Seat Module (DSM) attached to the driver seat track (if equipped)
• Memory seat position sensors attached to the driver seat track motors (if equipped)
• Seat position sensor attached to the driver seat track
• Driver and passenger seat control switches attached to the front door trim panels (includes memory switch buttons on driver side, if equipped)
• Driver and passenger heated seat switch attached to the front door trim panels
• Heated seat module attached to the front passenger door (if equipped)
• Safety belt buckles attached to the seat track

The front 20 percent seat has the following features:

• Serviceable armrest assembly attached to the cushion frame and folds upright as the 20 percent seat backrest
NOTE: Refer to Seat Armrest - Front  for the sequence of steps required for the removal and installation of the seat armrest lid.
• Serviceable center console lid that opens in 2 directions
• Serviceable armrest pivot screw covers
• Cup holder that is built into the cushion
• Telephone docking station in console (if equipped)
NOTE: Refer to Seat Armrest Locking Pin Reset .
• Seat backrest impact locking pin (keeps the seat backrest locked in the vertical position in the event of a collision)