Belt-Minder® Deactivating/Activating: Preparation
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Belt-Minder® Deactivating/Activating procedure can also be carried out using the scan tool.
- Before deactivating/activating the Belt-Minder®, set the parking brake.
- Place the transmission range selector lever in PARK (P).
- Place the ignition switch in the OFF position.
- Close all the vehicle doors.
- Unbuckle the driver and the front passenger safety belts.
- Place the parking lamps/headlamps switch in the OFF position.