LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1405 (Engine System - General Information) >> General Procedures >> Cylinder Bore Out-of-Round

Cylinder Bore Out-of-Round

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the cylinder bore in 2 directions. The difference is the out-of-round.
    2. Fig 1: Identifying Cylinder Bore Out-Of-Round Measuring Directions
    GF0000186Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals