Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front door window glass. For additional information, refer to WINDOW GLASS - FRONT DOOR .
Remove the front door interior sail panel.
- If equipped, disconnect the speaker electrical connector.
Remove the 2 front door glass top run bolts.
- To install tighten to 6 Nm (53 lb-in).
  
  Fig 1: Locating Front Door Glass Top Run Bolts
  Courtesy of FORD MOTOR CO.
Remove the front door glass top run.
To install, reverse the removal procedure.