LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1374 (HVAC - Climate Control System) >> Removal And Installation >> Heating Ventilation Air Conditioning (HVAC) Module >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When installing a new HVAC module on vehicles equipped with Electronic Manual Temperature Control (EMTC), the Programmable Module Installation (PMI) procedure must be carried out to configure the new module to the vehicle. Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) .
  1. Remove the middle center instrument panel finish panel. For additional information, refer to INSTRUMENT PANEL FINISH PANEL -- CENTER, MIDDLE .
  2. Remove the 4 HVAC module screws.
  3. Remove the HVAC module.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals