LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1355 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Keyless Entry Keypad >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH front door trim panel. For additional information, refer to DOOR TRIM PANEL -- FRONT .
  2. Position the water shield aside.
  3. Remove the keypad retaining clip.
  4. Remove the keypad from the door.
    • Disconnect the electrical connector.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals