Inspection and Verification
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the customer concern by operating the system.
- Visually inspect for obvious signs of mechanical or electrical damage.
- If an obvious cause for an observed or reported concern is found, correct the cause before proceeding to the next step.
- If the concern is not visually evident, verify the symptom. GO to SYMPTOM CHART - EXTERNAL CONTROLS .VISUAL INSPECTION CHART
Mechanical Electrical - Selector lever cable
- Manual control lever
- Selector lever or selector lever knob
- Fuse(s):
- Smart Junction Box (SJB) 5 (10A)
- Battery Junction Box (BJB) 27 (10A)
- Connections
- Wiring harness
- Brake Shift Interlock Actuator (BSIA) switch
- Transmission Control Switch (TCS)
DTC CHARTDTC Component Description Condition Symptom Action B2572 Brake shift interlock Brake shift interlock output circuit failure The associated circuitry connected to the Smart Junction Box (SJB) or fuse, or the SJB itself may have an issue causing a brake shift interlock concern. Brake shift interlock is inoperative or does not operate correctly. GO to PINPOINT TEST A .