LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1339 (Anti-Theft System - Passive Anti-Theft System (Pats) - (Except Hybrid)) >> Diagnosis And Testing >> Anti-Theft >> Pinpoint Tests >> Pinpoint Test A: DTC B2103 >> Pinpoint Test A: DTC B2103

Pinpoint Test A: DTC B2103

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. A1 INSPECT THE PATS TRANSCEIVER FOR CORRECT INSTALLATION 
    NOTE: Replacement of the PATS  transceiver does not require the PATS  keys to be programmed into the Instrument Cluster (IC) again.
    • Ignition OFF.
    • Verify the PATS  transceiver is correctly installed. Refer to PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER .
    • Connect the scan tool.
    • Ignition ON.
    • Clear the DTCs.
    • Ignition OFF.
    • Ignition ON.
    • Retrieve the DTCs.
    • Is DTC B2103 retrieved? 
scientia non olet · About LEMON Manuals