LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1316 (Steering Linkage) >> Removal And Installation >> Steering Gear Boot >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the outer tie-rod end. For additional information, refer to TIE ROD END - OUTER .
  2. Remove the tie-rod end jam nut.
  3. Remove and discard the 2 steering gear boot clamps and the steering gear boot.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals